document number: 88941 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 23-oct-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 high-voltage trench mos barrier schottky rectifier ultra low v f = 0.39 v at i f = 5 a v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath temperature 275 c maximum, 10 s, per jesd 22-b106 (for to-220ab, ito-220ab, and to-262aa package) ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high frequency converters, switching power supplies, freewheeling diodes , or-ing diode, dc-to-dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220ab, to-263ab and to-262aa molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 30 a v rrm 100 v i fsm 250 a v f at i f = 30 a 0.69 v t j max. 150 c v30100s vf30100s vi30100s vb30100s to-220ab to-263ab to-262aa tmbs ? ito-220ab 2 1 3 pin 1 pin 2 pin 3 k 1 k 2 3 nc a k heatsink nc a k pin 1 pin 2 pin 3 pin 1 pin 2 case pin 3 1 2 3 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol v30100s vf30100s vb30100s vi30100s unit maximum repetitive pe ak reverse voltage v rrm 100 v maximum average forward rectified current (fig. 1) i f(av) 30 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 250 a non-repetitive avalanche energy at t j = 25 c, l = 90 mh e as 230 mj peak repetitive reverse current at t p = 2 s, 1 khz, t j = 38 c 2 c i rrm 1.0 a voltage rate of change (rated v r ) dv/dt 10 000 v/s isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg - 40 to + 150 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88941 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 23-oct-09 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 10 ma t a = 25 c v br 105 (minimum) - v instantaneous forward voltage i f = 5 a t a = 25 c v f (1) 0.47 - v i f = 10 a 0.55 - i f = 30 a 0.80 0.91 i f = 5 a t a = 125 c 0.39 - i f = 10 a 0.49 - i f = 30 a 0.69 0.78 reverse current v r = 70 v t a = 25 c i r (2) 27 - a t a = 125 c 11 - ma v r = 100 v t a = 25 c 70 1000 a t a = 125 c 23 45 ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol v30100s vf30100s vb30100s vi30100s unit typical thermal resistance r jc 2.0 4.0 2.0 2.0 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab v30100s-e3/4w 1.875 4w 50/tube tube ito-220ab vf30100s-e3/4w 1.805 4w 50/tube tube to-263ab vb30100s-e3/4w 1.380 4w 50/tube tube to-263ab vb30100s-e3/8w 1.380 8w 800/reel tape and reel to-262aa vi30100s-e3/4w 1.455 4w 50/tube tube 35 30 25 20 15 10 5 0 0 25 50 75 100 125 150 average forwar d current (a) ca s e temperature (c) mounted on s pecific heat s ink vf30100 s v(b,i)30100 s re s i s tive or inductive load 0 4 8 12 16 20 24 28 32 0 4 8 12162024283236 average forward current (a) average power lo ss (w) d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0
document number: 88941 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 23-oct-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance fig. 7 - typical transient thermal impedance 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 in s tantaneou s forward voltage (v) t a = 150 c t a = 125 c t a = 25 c in s tantaneou s forward current (a) 0.001 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 80 90 100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (ma) t a = 150 c t a = 125 c t a = 25 c 100 1000 10 000 0.1 1 10 100 rever s e voltage (v) junction capacitanc e (pf) 0.001 0.01 0.1 1 10 0.01 0.1 1 10 100 t - pul s e duration ( s ) tran s ient thermal impedance (c/w) junction to ca s e v(b,i)30100 s 1 10 0.01 0.1 1 10 100 t - pul s e duration ( s ) junction to ca s e vf30100 s tran s ient thermal impedance (c/w)
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88941 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 23-oct-09 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pin 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pin 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38) to-262aa 0.401 (10.19) 0.381 (9.68) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) k 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pin 0.411 (10.45) max. 0.250 (6.35) min. 30 (typ.) (ref.) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) to-263ab 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) min. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. nc a k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) min. mounting pad layout
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
